Thursday

Cold Reset and Configuration Pages

LaserJet 4, 5m
Cold reset
Turn printer off.
Hold down both Go and Online buttons.
(for LJ5, hold only Go button)
Turn printer on.
Release buttons when display shows COLD RESET.
Self-test/configuration (please wait at least five minutes after cold reset!)
Press Menu button until TEST MENU is displayed
Press Item button until PRINT SELF TEST is displayed
Press Go button

LaserJet P1000/P1500, 1160/1320 series
Cold reset
Turn printer off
Hold down Go button
Turn printer on
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press Go button for 5 seconds

LaserJet 1200
Network Report
Press TEST button on external print server

LaserJet 1300
Cold reset
Turn printer off
Hold down Go button
Turn printer on
Continue to hold the Go button for at least 5 seconds, but no more than 15
Release the Go button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (print server) (please wait at least five minutes after cold reset!)
On the back side of the printer where the network cable plugs in, press the
little button above the cable.
can be found here

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.