Resetter For Canon IX4000 IX5000

The PIXMA iX4000 lets you enjoy high-quality photo and document printing up to A3+.

As part of the PIXMA range, the iX4000 is built with FINE (Full-photolithography Inkjet Nozzle Engineering) technology which ejects consistent 2 picolitre ink droplets with remarkable accuracy for smoother, sharper and more detailed images.

The iX4000 is the perfect solution for the home or business who want to print large format documents, graphics and photos at an affordable price.

The service manual consists of the following chapters

-Technical Reference

download resetter ix4000,ix5000
Read More[...]

RESETTERMP258 error 5B00 or error P07

Resetter Canon MP258 way or P07 error 5B00:
  I. Enter service mode

1. Turned off the printer and plugged the power cord.
2. Press the STOP / RESET and hold, then press and hold the POWER button.
3. Release the button STOP / RESET, then press the STOP / RESET 2 times
4. Release the POWER button
5. Wait until the LCD panel will show the number zero (0)
6. To be continue II

II. Program resetter
1. Download Service tool Mp258 Extract File
2.Run this program ( double click )

 1. Previous input two sheets of paper into the printer feedpaper
 2. Click on Main (1) the printer will print D = 000.0
Read More[...]

Download Epson R390 Tools 1. Turn on the printer
2. Set the pc date setting to 1 January 2007
3. Adjprog.exe run from the extract of a folder (or locate the file or application. Exe and run it)
4. Click accept
5. Click on the particular mode adjustment
6. Go to interview Then select waste ink pad counter then click ok
7. Click "button box" until it is done then click "initialization" button and then click "finish button"
8. Turn off the printer for 5secs then turn again
9. Set the date today. download
Read More[...]


How to Reset Ink Level for Canon MX300

Canon Pixma MX300 is one of the Inkjet multifuction (Print, Scan, Copy, Fax) printer from Canon. Like general case of printer, after filled by ink usually ink level not full. At some cases of printer, after ink level empty, printer cannot be used to print.

Here the Solution to reset the ink level for Canon Pixma MX300, follow this steps to reset the ink level in your canon MX300.
  1. Switch off the Canon MX300 and disconnect the power cable.
  2. While press and hold the power button, Connect the power cable to electric socket.
  3. While pressing the power button, press the “Cancel/Stop” button (red button).
  4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
  5. Press “>” (next button) once “Shipping Mode 3″ then Press the “OK” button. Press “OK” again for “without cleaning”.
  6. A test page will print.
  7. Open the cover, like you are about to change the cartridges.
  8. Disconnect the power cable again without switch off the printer.
  9. Take out the both cartridges.
  10. Close the cover.
  11. Connect the power cable and turn on the printer.
  12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.
Read More[...]

Laser Printer Disadvantages

Laser printers have many useful features but there are very few disadvantages to owning a laser printer. One of them is definitely the cost. The money that you could spend on a very high-end inkjet printer will only buy you a very low-end color laser printer with limited capacities. Color laser printers with multi-functions such as a copier and a fax all in one are even more expensive. However a middle of the line black and white laser printer is comparable to the price of a top of the line color inkjet printer.
The average home computer user definitely does not need a laser printer. Sure laser printer prices have fallen considerably in the last couple of years. But have you look at the cost of laser toner? The average laser toner cartridge sells for over $100. The cost of replacement ink can really ad up on you. Unless you are printing hundreds of pages each day you really don’t need a laser printer. The cartridges for laser printers are several times more expensive then the cost of the toner cartridges for inkjet printers. However they do last longer especially if you remember to set the printer in black and white printing mode when printing black and white and only using the color mode when it is really needed. Another way to make an expensive color laser toner cartridge last longer is to keep the printer in low quality mode unless you are printing out the final document.
If you live in a hot or humid climate a laser printer may not be the ideal solution for you. This is because running these machines can make a room very hot. The fuser inside them, which is the device that melts the plastic granules that constitute the powder that makes up the toner onto the paper, heats up to as high as 200 degrees Celsius.
Laser printers print only on certain kinds of paper. If you want to print out photographs then a laser printer is not for you as they are not yet capable of printing high-resolution images. Also you cannot put photographic paper through a laser printer. For the best quality images you need to buy a bubble jet ink printer that can transfer an image onto photographic paper. The color quality that you get with a bubble jet ink printer is just as good if not better than the color quality that you can obtain with a laser printer. A high-end color printer that produces quality color images can cost as much as $3,500 to $10,000 whereas you can get a good quality ink jet printer for about $200.
Another area of functionality where a color laser printer may disappoint you is in terms of speed. Only the very high end laser printers used by corporations and big companies can print images fast. You can expect the average color laser printer that is sold for personal use to print out about four pages a minute. This might be too slow for businesses that need to speedily print out mailing lists or rough copies of documents for quick perusal.
Laser printers are limited by the amount of memory that they are sold with. This can sometimes limit the number of fonts that you can use. To expand the memory of your color laser printer you usually have to buy a small RAM board. This is the only reliable way to install memory so that the color laser printer can utilize a number of fonts.
The more expensive a laser printer is the faster it is. The affordable models only print out about four pages a minute. Top end models print out about thirty pages a minute but they are not really affordable for the individual.
Another drawback of using a laser printer is that they are usually heavier and larger than the impact or inkjet type printers. However new technology is arriving every year to make the color laser printer a more portable and personal item.
Read More[...]

Canon PIXMA iP1500 Waste Ink Counter Reset

Step1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 : Softwarefor Permanent
1. Reconnect the printer cable.
2. OpenGeneral Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark"After service mode Pls use software for permanent reset"

Canoni850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function 0 presses - green- Test print (or exit service mode on i960)1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960) 2 presses - green - EEPROM initialize 3 presses - orange- Reset waste ink counter
Read More[...]

PG 40 and CL 41 canon cartridge reseting

This is as far as I got into the steps you suggested:
1. Disconnect the power cable.
2. Hold down "On/Off" button.
3. Reconnect the power cable.
Holding power and pressing cancel once lights up an orange led next to a lightning symbol, and not much else.

Pressing cancel twice gives "Factory Mode 1", which runs a few rollers, but doesnt say Idle after a good minute or so, and doesnt seem to repond to anything.

Pressing cancel THREE times switches on "Factory Mode 2", which gives the following options:

Asks how many times, options 1 5 10 15 20 endless
Tried 1, seems to run the scanner along once and says complete.

Pressing OK gives the following:
OK R134-231
G137-237 B139-236

Fills all blocks of the LCD screen to test

Options for BK/CL, Normal/Silent, and DPI settings, seems to test scanner again

Same options as above, doesnt seem to do much

I cant even be bothered with this, I dont use the fax

Shows G3 TX and 4.8k or somesuch, modem speaker blares static

G3 V.17 TX
Makes more silly nostalgic 90s dialup modem noises.

G3 V.34 TX
If this is testing the modem, I cant be bothered again

Lets you test speaker tones at 462Hz, 1100Hz, 1300, 1650, 1850, 2200 Hz, loadsa fun :D

Lets you switch on/off some kind of internal switches named CML and H, not playing with this.

Press right it says CI=0, HOOK=1, press left it says CNG=0 HOOK=1, something to do with phone again, so stuff it

Says DTMF Tx on screen... ?

Again lets you run through various frequencies, this time with a volume control that only goes UP. Clearly great for pissing neighbours off.

Repeatedly tests the scanner at the short end.

Out of options for Factory Mode 2

Pressing cancel 4 times runs the printer as normal.
5 times moves some rollers and bits but shows nothing on-screen.
6 seems to run as normal again.
Not pressing the cancel button at all does nothing.
Read More[...]


Printer Ink Cartridges Introduction

An ink cartridge is a replaceable component of an ink jet printer that contains the ink (and sometimes the print-head itself) that is spread on paper during printing. Each ink cartridge contains one or more partitioned ink reservoirs; certain manufacturers also add electronic contacts and a chip that communicates with the printer. Before three decades dot matrix printers were used very commonly. They required a ribbon to print characters on the paper.  As technology marches on a new concept of drop on demand technology was invented for the ink printer cartridge. By 1990 this method was accepted by all printer and ink printer cartridge manufacturers. This is the printer technology of choice for the vast majority of consumers today. This printing method is available for black and white and color documents as well as photo printing.

 Printer Cartridge

Printers require specific printer cartridges, which are usually packaged with the printer upon initial purchase. When buying a printer cartridge, choose a type that matches with your printers compatibility. Make sure to refer to the types of cartridges to check what type of cartridge supports. Make sure that you are buying from a trusted retailer, because some are selling poor quality cartridges that can damage your printer. Printers will not function properly without a printer cartridge, which holds the ink that allows the printer to produce copies of documents or images. It is usually installed on a panel in printers and moves in a lateral position over the paper, dispensing ink. Remember following points before puchasins ink cartridges:

a) Avoid generic cartridges. The ink used in these cartridges may damage your printers nozzles.
b) Figure out the printing quality you need. Ink cartridges made by the same manufacturer as the printer will produce the best results. These cartridges are also the most pricey.
c) Take a look at the printer warranty. Some manufacturer’s warranties are void if an ink cartridge is used that is made by a different manufacturer.
d) Look at the page yield of the ink cartridge you are buying. This will tell you how much printing the cartridge will do.

Branded toner cartridges are ideal to use because they are of high quality and are still affordable. They are original and are designed by the printer manufacture. A specific branded printer functions with their compatible cartridges. The ink cartridge is housed in a plastic container and is available in different colors. Ink cartridges are available in a single, four color cartridge that already includes black, a tricolor cartridge that has three of the major colors used to mix together to form other shades, and a separate blank ink cartridge.

Read More[...]

Reset Epson R340 error protection counter

follow this Step to reset Epson R340 error protection counter
Turn on power.
Press and hold buttons
Hold for 12 seconds plus and then release.

good luck
Read More[...]

Open Prepress Interface

protocol developed by Aldus Corporation used in electronic prepress to link desktop publishing systems and high-end CEPS. Essentially, high-resolution color images are stored on a central network server, to which all the workstations are connected. Low-resolution files are sent by the server to individual computers working on page layout. The low-res images are imported into the page (in a kind of FPO way), positioned, and comments sent back to the OPI server provide specific cropping, scaling, positioning, and color information about the image. The servers PostScript driver inserts the proper instructions into the PostScript code. When the page is ultimately output to an imagesetter connected to the network, the high-resolution image is swapped for the low-res one, and the indicated instructions as to cropping, etc., are executed.
The work with layout documents which include big graphic files (high resolution, big size) may become a test for someone’s patience due to the rate of the processing. The dealing with this kind of files, which need a lot of memory in the workflow, can be simplified with an Open Prepress Interface (OPI) System. Although the PCs and networks become constantly faster and powerful, OPI is used for the Prepress workflow in order to minimize the waiting period. It is in use for 10 years now, but only a few people know this application.

OPI- principle

If a graphic file is placed into a document, layout applications normally integrate the whole graphic file. If the graphic files are big, the processing of the document becomes very slow due to the quantity of the graphic data. The resources needed by the PC and the network (if used) are unnecessary; because low resolution graphic files are sufficient for the work on a monitor in order to create the layout or to judge the colors.

Because of this, OPI-programs create low-resolution graphic files with the same dimensions and place them into the layout document instead of the originals. The high-resolution files are integrated by an OPI-server just after the print job is started. The OPI-server finds the data by so called OPI-comments, which are included in the PostScript print file or in a PDF file. These OPI-comments describe, among other things, the memory needed, the sizes, and the position of the graphics in the layout document. Another aspect is the possibility to share the work of one project between the graphics and the layout, because the final graphics are embedded after the print job is started.

Therefore, the output files include only references to the original high-resolution graphic files in order to save resources of the PC and the network. The big advantage is that the resources which are needed of the computer for the layout document are moved from the PC to the server. This saves time and costs. If there is a powerful OPI-server, the print job is speeded up, too.

There are, among others, three popular OPI-server programs. All three programs are offered for different platforms:

EtherShare OPI from Helios

UNIX (Solaris, AIX, HP-UX, IRIX, Compaq UNIX)


Windows 2000

Mac OS X

Color Central from Scenicsoft

Apple Mac OS

Windows NT 4 Server

Windows 2000

Full Press from Xinet

UNIX (Solaris, Solaris x86, IRIX)

Mac OS X

Windows NT 4

Windows 2000 Server

Read More[...]

Printer Emulation

Emulator means someone who copies the words or behavior of another Synonyms. In computer sciences hardware, software or a combination of the two that enables a computer to act like another computer and run applications written for that computer is called emulator. In the past, it was often a hardware add-on that actually contained an instruction execution module for the emulated computer. Today, "emulator" more often refers to software, which provides a translation layer from the emulated computer to the computer it is running in. understand printer emulation, remember that a printer receives commands from the computer. These commands are in a specific printing language. Many manufacturers have developed printing languages but some of them have become industry standards. To meet the industry requirement manufacturers try to make their printers compatible with these de facto standards. PCL and Postscript are most popular languages and have become a standard, other manufacturers equip their printer according to the specifications of these languages. For example, while PCL was developed by Hewlett–Packard, it was widely copied by other manufacturers who offer emulations of HP printer. By the emulation of a HP printer another printer is able to understand PCL. If you are using an emulated printer, you may find “Laser Jet IIp compatible” or “PCL5 compatible” etc on it.
The term emulation especially applies to PostScript printers because Adobe itself does not produce printers and each PostScript printer produced by any manufacturer emulates PostScript. The term emulation also applies to printers that do not emulate the printer or the printing language of another manufacturer but that emulate another type of devices. For example some Laser printers have the ability to emulate other graphic output devices such as pen plotters. These printer emulate HP GL language which is used by pen plotters. In some graphic applications a plotter can take 30 minutes to print a complex drawing, while the draft output is produced from a laser printer in a few seconds. It is possible for designers to print a sample on laser printers and after finalizing the drawing it can be printed on plotter.
Adobe does not sell printers but it sells Postscript license to the manufacturers. Before Postscript Level 2, the license fees charged by Adobe were high, so some manufacturers tried to emulate the PostScript language. But nowadays license fees has been reduced and manufacturers prefer to use Postscript instead of emulated languages.
Read More[...]

Download Animated Wallpapers for mobile

Large Animated Wallpapers for mobileLarge Animated Wallpapers for mobile
Read More[...]


Clear the Memory of the Brother DCP 385C Printer

The Chum DCP-385C is a multi-function inkjet machine. It prints, scans, copies and faxes making it a favorable bag duty ingenuity. As message is conveyed to the unit from any one of the signaling sources, the machine uses an exhibit faculty separate to keep the queue in rule. This faculty allows the printer to recall collection and uphold projects after article jams or working out of essay. If you dont acquire the remembering, your machine may stoppage functioning.

Here the code to elucidate twinkling module

1. Afford the "Machine Usage" on your screen of the computer. Get the Friend DCP-385C in the machine fabric.
2. Select the Comrade printer in the web and unfastened the line.
3. Determine all projects from the store by clicking on them and flying them into your belittle bin. Do this as a resistance and quit method by clicking and holding the highlighted entropy and pulling it into the scrap before emotional the penetrate.
4. Try your printer again.

Reinstate to Plant Settings

1. Locate the two arrows on the key pad on the proximity window. One is an "up" mark and one is a "downcast" arrow.
2. Pushing either of the arrows (it doesnt thing which) until you see the words "Works Reset."
3. Push the "+" fasten to prefer the plant set choice. The machine present cross a minute to liquid out all memories.
4. Pushing "Stop/Exit" button settled on the committee to income to canonic operative.
Read More[...]

Panasonic Error

Like other office equipments, Panasonic machines are equipped with a self diagnose system to indicate an error message whenever a problem occurs in the machine. Most common error messaged U 25 indicates that toner bottle is not feeding toner. Try to reinstall the toner after shaking it well.
U13 indicates toner empty condition, it must be cleared by pressing any key if F5-63 is set to 0 or by pressing Function and 1 if F5-63 is set to 1. Fusing errors (E4-x) should be reset in F9 mode, 06 (RAM initialize), sub code 04.
E1-01 Scan problem, home sensor, scanner motor, board SPC board, connector
E1-20 Laser problem, Check laser unit
E1-22 Laser polygon motor synchronization
E1-31 Exposure lamp, inverter board
E2-01 Lift motor for 1st paper tray
E2-02 Lift motor for 2nd paper tray
E2-03 Lift motor for 3rd paper tray
E2-04 Lift motor for 4th paper tray
E2-10 System console motor problem, drive motor
E3-01 Toner motor not turning
E3-02 Toner screw motor problem
E3-03 Toner sensor problem
E3-10 HVT/grid problem
E3-20 Main motor drive problem
E4-01 Low fuser temperature, lamp, thermal switch
E4-02 Fuser jam
E4-10 Fuser fan problem
E5-11 Printer connection SC board or SPC board
E5-17 Scanner problem
E5-42 Total counter
E5-60 Power Supply fan
E7-90 Hardware key
E13 Out of toner, toner bottle problem, toner sensor
HDD Option required additional sort memory
U00 Key counter or ID code needed
U01 Front door, side door or interlock
U07 Interlock on paper feed cover 1,2 or 3.
U13 Add toner
U14 Toner waste toner container full.
U15 Waste toner container missing
U16 No developer
U18 Departmental copy counter full
U20, 21 ADF cover open
U22 ADF exit cover open
U25 Toner bottle not feeding toner
U90 Replace internal backup memory

Read More[...]

Epson 2200 error

Got the maintance manual and tried to locate the problem. What is happening is:

1 Turn on printer and it feeds a sheet of paper.
2 Paper goes by PW sensor and stops (too far in). Does not move paper back to the correct positon. Tried it on ADF and manual and same thing happens.

3 All ink lights start flashing.
I think it is the paper detector but there is nothing in the maintenance manual that I can find to fix the problem.
Spent a small fortune on this printer, ink and archival paper and would like to get it working again, if possible.
I have talked to Epson (thats a laugh) and Dawn Electronis several times and basically was told that for an additional $175 they would work on it (additional service charge).
I fell that I have been really ripped off.
If it can not be fixed, I just wasted $3,000 and it is going into the trash.
Would never recommend Epson printers again.
Read More[...]

Data Protection by Encryption

Encryption is a method to protect data against unauthorized access. Actually, encryption protects data that might be accessed, for example, in an IT environment by sniffing. By applying encryption methods to data, that data is turned into a form that is not easy to interpret without the decryption key. To turn encrypted data back into the original form you need to apply the appropriate decryption method. Thus, unauthorized persons may obtain encrypted data, but if they do not know the appropriate decryption method, they cannot access and use the original data. Of course, authorized persons must be the only persons who have access to the required decryption method.

Almost all encryption methods use a special parameter, the so-called key. To decrypt an encrypted message, you need to know which encryption method was used (or which corresponding decryption method is to be used) and additionally you need to know the correct key to make decryption work correctly. With modern encryption methods, the key is usually a character string of a defined length. For example, encryption methods may use 44-bit keys, 56-bit keys, 128-bit keys or even longer keys. The length of the key affects the security level of an encryption method. The most simple, but also a very time consuming way to crack a key is to try out each possible combination of characters. This method is called “brute force attack”. The longer the key, the more possible combinations you have to try out. That is why short keys are cracked more quickly than long keys. To reduce the time required to crack a key, some programs use a dictionary because most users build their keys or passwords from real words. But the design of an encryption method also plays an important role and some methods with shorter keys are harder to crack than other methods using longer keys. As computers become more and more powerful, the time required to try out a number of different combinations decreases and approved encryption methods become obsolete after some time. Basically, there are two kinds of encryption methods,

symmetric encryption methods and

asymmetric encryptions methods.

With symmetric encryption methods, the sender encrypts his message or data with the same key the receiver uses to decrypt the data. The problem with symmetric encryption methods is that the sender not only has to transfer the encrypted data to the receiver, but also the key which is required to decrypt the data. The transmission of the key from the sender to the receiver requires additional security measures.

With asymmetric encryption methods, two kinds of keys are used, one for the encryption of data and one for the decryption of data. Asymmetric encryption methods use a public key and a secret key, called the private key. Both keys are related to each other as the private key is used to generate the public key (but it is not possible to identify the private key if you just know the public key). Each participant of encrypted communication needs to have a public key and a private key. A participant publishes his public key and anyone who wants to send this participant encrypted data uses the public key of the participant to encrypt the data. The private key is kept by the participant and he uses it to decrypt arriving data. Compared to symmetric encryption methods, the advantage of asymmetric methods is that participants do not have to interchange secret keys to make communication work. With symmetric methods, the distribution of secret keys always requires additional security measures, because communication is no longer protected if the secret key is known by unauthorized persons. The public key of asymmetric methods is only used to encrypt data, but you cannot decrypt data with a public key. Thus the public key can be known by anyone and the distribution of public keys among the participants of a protected communication does not require any security measures.
Read More[...]


Here are step for reset canon pixma iP1880

Download service tool for Canon iP1880
at link

* Driver should have been install correcly.
* Connect USB cable.
* Before connect power, press and hold power button then connect the power.
* At the same time Hold power button, and press reject button for 2 times then release power button.

* Run software resetter for canon iP1880.
* Don’t forget to open lock release in the software. ( note : to view locK release menu, min resolution 1024 x 728)

* Then select Set Destination to iP1880
* Click MAIN and PLATEN
* Finally test print by click TEST PATTERN1.

important for permanent reset waste ink canon iP1880 Printers please, resetting use software resetter. Above way can be used at canon IP 1100, iP1800 and iP2500 series

good luck
Read More[...]

3M mpro120 pocket projector

3M mpro120 pocket projector

now i share about 3M mpro120 user manual inside is about owners instruction, guide, repair, support, and share 3M mpro120 pocket projector manual problems. you can download the pdf here download
Read More[...]

Error Code for Printer Canon IP1300 IP1700 IP1200 IP1880 and IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green
Problem : any problem with printer mechanics
Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green
Problem printer absorber full
Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green
Problem: Black or Color cartridge trouble.
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green
Problem: Black or Color cartridge trouble.
Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green
Problem : printer absorber full (Waste Ink Pad Full)
Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset
Read More[...]

HP PSC 2410 clicking noise

You actually dont have to country up the machine and what not. All you change to do is:
Block 1: Undo noesis Material
Locomote 2: Regard the and 3 piece you secure it in
Locomotion 3: After it shows expression "Biased Set" undo it
Manoeuvre 4: Make the "Cancel" add time plugging it gage in
Quantify 5: Conscionable reset the printer again and you are finished
Read More[...]


Led Error code for Canon IP1300 IP1700 IP1200 IP1880 IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green
Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset
Read More[...]

HTC desire Z manual user guide

HTC desire Z. read this manual installation troubleshooting methods for maintenance before use and thoroughly enjoy owners manual creation HTC desire Z user manual user guide configuration settings to install a factory reset, and where all those who use the product to read it and keep it up.

HTC desire getting Z manual based content personalized phone calls people start keyboard messages account and synchronization social email calendar clock and weather Internet-connected Web browser Bluetooth camera photo, video and music map and location more application security settings for the update and reset trademarks and copyrights of the content in the index table. Download HTC desire Z hereuser manual

Read More[...]

Resetting the Hewlett Packard C5010A

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the OfficeJet D Series:
1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press the < and > (also the + and -) at the same time, then release quickly (the lcd panel must be showing the date or the procedure will not work)

3. On the keypad, press in order 4,5, 6.
4. A message will appear asking if you want to override the ink level gauge. Press 1 for yes (You can later turn the ink gauge back on if you install a new cartridge by going through steps 2 and 3, then pressing 2 when prompted if you want to override the ink level gauge).
Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the HP Color InkJet CP 1160 Series:

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press and hold down the power button.
3. While holding the Power button:
Press the Cancel button 12 times
Press the Resume button 3 times
4. Release the Power button

The ink gauge is now off and you can resume printing
Read More[...]

Install NetBEUI on Windows XP

The files that you need for installing the NetBEUI protocol on Windows XP are Netnbf.inf and Nbf.sys. To install NetBEUI, follow these steps:

  1. Insert your Windows XP CD-ROM in the CD-ROM drive and then locate the ValueaddMSFTNetNetBEUI folder.
  2. Copy the Nbf.sys file to the %SYSTEMROOT%System32Drivers folder.
  3. Copy the Netnbf.inf file to the %SYSTEMROOT%Inf hidden folder.

    Note To make a hidden folder viewable, follow these steps:
  4. Click Start, click Run, type Explorer, and then click OK.
  5. Click Tools, click Folder Options, and then click the View tab.
  6. Under Advanced Settings, click to select Show hidden files and folders under the Hidden files and folders Folder.
  7. Click Start, click Control Panel, and then double-click Network Connections.
  8. Right-click the adapter you want to add NetBEUI to, and then click Properties.
  9. On the General tab, click Install.
  10. Click Protocol, and then click Add.
  11. Click to select NetBEUI Protocol from the list and then click OK.
  12. Restart your computer if you are prompted to do this.

The NetBEUI protocol is now installed and working
Read More[...]

What is The Secure Socket Layer SSL

The Secure Socket Layer (SSL) protocol provides a framework for passing information through an authenticated and encrypted tunnel. Each SSL connection defines a point-to-point tunnel between a client and a server. The SSL protocol operates within the presentation layer and allows the client and server to negotiate authentication, encryption, and checksum algorithms.
The SSL protocol was originally developed by Netscape. Version 1.0 was never publicly released; version 2.0 was released in February 1995 but "contained a number of security flaws which ultimately led to the design of SSL version 3.0", which was released in 1996 (Rescorla 2001). This later served as the basis for TLS version 1.0, an Internet Engineering Task Force (IETF) standard protocol first defined in RFC 2246 in January 1999. Visa, MasterCard, American Express and many leading financial institutions have endorsed SSL for commerce over the Internet. SSL operates in modular fashion. It is extensible by design, with support for forward and backward compatibility and negotiation between peers. SSL, by itself, is a system for negotiating protocols. SSL does not provide security nor natively include cryptography; there is no security from SSL by itself. The security in SSL comes from the negotiated protocols. For example, the client may support DES, 3DES, and AES encryption, whereas the server supports 3DES and RC2. Using SSL, both systems can negotiate communication using their common 3DES encryption algorithm. A variety of authentication, encryption, and checksum functions may be incorporated into SSL. SSL is used to tunnel plaintext data through an encrypted tunnel. Application-layer protocols that normally transmit unencrypted data gain encryption, authentication, validation, and nonrepudiation by using SSL. For example, the Web uses HTTP for transmitting and receiving HTML data normally via plaintext transfers. HTTP over SSL is called HTTPS. It uses SSL to encrypt the Web requests and replies. HTTPS is the most common use of SSL. Other uses include stelnet and sftp—telnet and FTP over SSL. Because SSL is a presentation-layer protocol, any application-layer protocol
may use SSL. Although most SSL-enabled applications explicitly link to an SSL library,stand-alone SSL applications can proxy application data through an SSL connection. Example generic proxies include s_client and s_server from OpenSSL, and the stand-alone Stunnel application (
Several versions of the protocols are in wide-spread use in applications like web browsing, electronic mail, Internet faxing, instant messaging and voice-over-IP (VoIP).
SSL v2 is flawed in a variety of ways:
* Identical cryptographic keys are used for message authentication and encryption.
* MACs are unnecessarily weakened in the "export mode" required by U.S. export restrictions (symmetric key length was limited to 40 bits in Netscape and Internet Explorer).
* SSL v2 has a weak MAC construction and relies solely on the MD5 hash function.
* SSL v2 does not have any protection for the handshake, meaning a man-in-the-middle downgrade attack can go undetected.
* SSL v2 uses the TCP connection close to indicate the end of data. This means that truncation attacks are possible: the attacker simply forges a TCP FIN, leaving the recipient unaware of an illegitimate end of data message (SSL v3 fixes this problem by having an explicit closure alert).
* SSL v2 assumes a single service, and a fixed domain certificate, which clashes with the standard feature of virtual hosting in webservers. This means that most websites are practically impaired from using SSL. TLS/SNI fixes this but is not deployed in webservers as yet.

Read More[...]


HP Laserjet Error Codes 13 14

For Laserjet 5si. This error is caused by a defective paper control PCA

Replace paper control PCA.
Read More[...]

E000 on Canon IR220 2800 3300

E000 is temperature low indication. It means that the reading of the main thermistor does not reach 30C within 1 second after the main switch is turned on. Or, it does not reach 70C 2 seconds thereafter. Before you start to check the defective parts, make sure that the line power source is stable and meets the machine power ratings. If it sounds good, first thing to check is the fixing film. A thermistor is used to detect the temperature of the fixing film, faulty thermistor sends wrong signal to the control board and may cause E000. Check the interval between pin 1 and between pin 4 of the connector (4-pin) of the thermistor for electrical continuity. If is few ohm, the thermistor has a short circuit. Canon recommends replacing the whole fixing film in this case. Second reason of E000 is open fixing heater circuit. Check continuity between heater terminals, if it is open replace it. Rarely, faulty power supply PCB or the DC controller PCB also result in E000. I never tried to repair a Controller Board but in most cases power supply can be repaired by a professional.

Read More[...]

Printer Paper Jams How to Prevent it

Paper jamming problems are very typical. Most paper jams are caused by one or more paper characteristics. 
When you have paper jamming problems, first of all check the paper feed tray from which the paper was fed. The following jams, organized by area of the machine, may be related to paper. Some common reasons of jamming caused by paper are following:
Paper Curl:
The paper’s moisture content is controlled during the manufacturing process. If the paper moisture changes between shipping points and points of consumption, due to poor storage of paper such as by open windows in low temperatures or in non-humidity controlled storerooms, the condition of paper fiber is changed. A curl will result due to this imbalance of humidity moisture between the front and backsides of the paper. Heavier paper, and one side coated papers are particularly susceptible to curling. Proper paper storage is very important in preventing curling problems. Even when sheet of paper is flat, if it contains high amounts of moisture, it may cause a curl problem after passing through the fuser section of printer or photocopier.
The grain of the paper:
The grain of the paper refers to the direction of the fibers in a sheet of paper. The grain direction results from how the paper fibers lie parallel with one another during the paper manufacturing process in the direction they ran in respect to the wire belt. This grain direction effects how the paper will curl. For best copier/printer performance, the grain direction should be parallel to the long side of the sheet. Long-grain papers are about twice as stiff in the long direction. Short-grain papers are about twice as stiff in the short direction.
Paper Moisture:
The papers moisture content is tied directly to its dimensional stability and strength. Too much moisture causes excessive curl, jams, and print quality problems. If the paper’s moisture content is too low static problems may result, which can also create to jams and misfeeds as well as cause image quality problems. The best performance in Electrographic printing systems comes with papers that have nominal moisture content of 4.5 ± 0.5 %. Usually, the paper for copiers/printers is manufactured to have the aforementioned moisture content. Moisture content can be affected by the environmental conditions of packaging and storage. The paper ream should be packaged to ensure moisture integrity. Moisture-proof ream wrappers are essential to maintaining the correct moisture level. If the paper is moved from a storage area to a location with a different temperature and humidity, the paper should be conditioned to the new location before it is used.
Fanning a new opened ream of paper is extremely important and should be performed each time paper is loaded. Fanning the paper allows the paper to feed better due to less surface friction between the sheets and it helps remove any paper lint before being placed in the machine.
Fanning is especially important when using paper that has been pre-drilled. Fanning the paper is a little step that, when done properly, can reduce or eliminate paper misfeeds and help to keep the machine free of dust and other paper debris.
Read More[...]

How to Clean Scanner Mirrors in HP3330

This is not an Hewlett Packard document, the author does not work for Hewlett Packard and is not responsible for any damage you do to your printer. This procedure is for skilled repair technicians and is not recommended without some knowledge of equipment repair. Proceed at your own risk.

1. Open the document feeder and pull up on the two black tabs on the left and right.
2. Pull up on the right part of the doc feeder then the left, remove doc feeder, set aside.
3. Open front door and rear fuser door.
4. Remove screws closest to teal colored fuser release levers. (side cover screws)
5. Pull right cover out from back while releasing clip on bottom of cover, pull cover towards the back and remove.
6. Push on indentation at back of left cover and pull out at back, this cover is hinged.
7. Remove four screws now visible at base of scanner assy., two on left two on right.
8. Slide covers towards back and remove.
9. Remove two screws in the back just above the fuser and just below the scanner assy. base. Remove two screws in the front, visible now after removing the scanner assy. base covers on the right and left (the left one is just behind the hinged cover near the top hinge.)
10. Remove flat ribbon cable (on left side) at either connection point to disconnect scanner assy. from print engine.
11. Entire scanner assembly can now be slid forward and removed.
12. Close the front, rear and left side doors on the print engine portion and set it aside.
13. Grab front panel face plate at top and pull forward and remove. (or pry gently at top of face plate).
14. At top of exposed front panel you will see four slots in the scanner assy. At the third one from the left there is a latch (dark grey plastic). Push down on the latch with a screwdriver and slide the whole panel assy. to the right. Lift up and out making sure to disconnect the cable.
15. Remove the three screws in the now exposed dark grey front panel cradle and cover, remove the two cables connecting the cover to the main board, pry gently at the top outer corners of the cover and pull it forward and down, remove the cover.
16. Now remove the four scanner assy. screws (one and the center front, center back, center right, center left) all are facing down under the assy. (Or just flip it upside down and remove the four visible screws.
17. Turn the unit back upright and remove the four screws at the back/top (two of them are down inside where the doc feeder normally goes.) Remove the top scanner cover.
18. DANGER your about to work on the scanner carriage itself there is a really good chance that you could break it or the mirrors or bulb so proceed at your own risk.
19. At the top and bottom left side of the black cover enclosing the mirrors are two slots, if you put a small screwdriver in the slots and push gently to the right and lift that side of the cover it should come loose. Then open it to the right and remove it from the right slots.
20. Remove the black screw at the front of the assy., Disconnect the white wires from the CCD board and out of the harness, lift the clear plastic bulb holder out with the bulb then remove it from the rear. (it’s a tight fit at the front.)
21. The top mirror is held in by some really tight clips they have to be removed from the bottom right (clean the mirrors without this step if possible). NOTE: optical mirrors are not like a bathroom mirror, there is no glass covering the reflective surface. The back side of the mirror has glass covering it so if you get it in backwards it won’t work. (The way to tell which side you have is touch your screwdriver to the mirror and if it’s the right side the screwdriver will appear to touch the reflection of the screwdriver, if it’s the wrong side the screwdriver will not touch the reflection of the screwdriver because of the glass covering the reflective surface.
22. Now clean the remaining mirrors and lens very thoroughly with alcohol. Make sure they are very clean. You can put the top mirror back and clean it in place to make cleaning it easier.
23. When re-assembling the top cover check to make sure the white strip on the right side is clean.
24. Reverse procedure for re-assembly.
Read More[...]


Canon Waste Ink Tank Reset Procedures for canon BJC 1000 Series

How to reset reset canon BJC 1000 Series
follow this step to Reset canon BJC 1000 Series

1) Remove Cartridge2: Unplug the AC Power Cord
3) Hold down the RESUME button
4) Release RESUME after plugging in the AC Power cord.
5) Press the RESUME once within
5) seconds and release the RESUME .
6) Press and HOLD RESUME for two seconds or more and release it.
7) Press and HOLD RESUME for two seconds or more and release it.
8) Unplug AC Power Cord to set data.

this work for me
good luck
Read More[...]

HP Laserjet Error Code 13 XX PAPER JAM

Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.

For all jam messages, do the following:
1. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path.
2. Open and close the top cover to clear the message.
3. Check sensors and flags in the paper path for proper operation.
Read More[...]

Resetter canon mp258

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

1. After you download the resetter, extract it and double click "servicetool.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer.
Read More[...]

reset waste ink canon iP4000

Here this step by step to resetting waste ink counter printer canon iP4000
1. With the printer plugged in and powered off, press and hold the
Resume/Cancel button, then press and hold the Power button.
Do not release the buttons. The LED light should be green to
indicate that a function is selectable
2. While holding the Power button, release the Resume/Cancel button,
do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons. Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and
green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each
time the Resume/Cancel button is pressed, the LED lights alternately in
orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed.
When the operation completes, the printer returns to the menu selection
mode automatically
6. Press the power button to exit service mode.
Read More[...]


BlackBerry Java Application Development Wizard to beginners luck

BlackBerry device users can use one of these two services, or can use both services on the same device. Understanding the difference between these two solutions and types of users you plan to support in applications, which is important since it would impact on the type of transport you use and how to synchronize the data.

Table of content:

-Understanding the BlackBerry and the BlackBerry device for programming
-The design of the BlackBerry device applications
-Best practices for writing applications for BlackBerry devices
-Memory for data storage.
-Wireless data transport
-Integration of multimedia features
-Integration with BlackBerry applications
-Application security
-Localization of applications
-Testing, and application settings
-The abbreviation list

Read More[...]

3M dynatel 2273 manual

Here are 3 M dynatel 2273 you can download user manuals, owner the instruction guide, repair, support, and 3m dynatel 2273 manual problem sharing.

  downloads3m dynatel 2273 users Guide

Read More[...]

How to Manual Reset Printers Canon Pixma iP4200 iP5200 iP6000 and iP8500

Canon Pixma iP4200, iP5200, iP6000, iP8500 Reset Procedure
  1. Turn off the Printers.
  2. Hold Resume button click POWER.
  3. Hold button RESUME, release POWER
  4. Then press the button again twice RESUME.
  5. Release all the buttons.
  6. Indicator led in green and stay green.
  7. Click the button 4 times RESUME, if you want to make another transaction. :
Look at the table below:

1 led- Orange – Service test print 1 times – Orange – Service test print
2 led – Green – EEPROM information print 2 times – Green – EEPROM information print
3 led – Orange – EEPROM initialization 3 times – Orange – EEPROM initialization
4 led – Green – Waste ink counter setting 4 time – Green – Waste ink counter setting
5 led – Orange – Destination setting (Press Power > Press Resume 3x) 5 times – Orange –
Destination setting (Press Power> Press Resume 3x)
6 led – Green – Print head deep cleaning 6 times – Green – Print head deep cleaning
11-13 led – Orange, Green, Orange – Return to menu selection
14 led – Green – Left margin correction 14 times – Green – Left margin correction
  • Turn off the printer POWER button.
Read More[...]

Epson Resetter

The Smart Resetter for Epson will reset the "smart chip" on almost all Epson inkjet cartridges multiple times. Reset printer cartridge chips to factory specifications, showing full ink levels and providing the same number of cycles as when the Epson inkjet cartridge was new. Just place the cartridge on the resetter and wait 4 seconds!
Read More[...]


3Com AirConnect 9550 9150 user guide

Here you can download the 3COM AirConnect 9550/9150, user manuals, owners of instruction, guide, repair, support and share the 3COM AirConnect 9550/9150 User Guide issues.

To download for the 3COM AirConnect 9550/9150

Read More[...]

Download resetter for stylus photo 510

Download resetter for stylus photo 510
remember we are not serve any file on own host

happy download
get here
Read More[...]

Stylus Photo R290 Review

Stylus Photo R290
Possibility of CD-printing, fully controlled color rendering, barely visible printing points and more than moderate price make this model a very attractive variant. It is a very good working instrument, and economic sets make quality photo printing more affordable.
Read More[...]

The Hewlett Packard Company

Hewlett Packard is a technology corporation headquartered in Palo Alto, California, United States. Hewlett Packard is the premier worldwide technology solutions provider to businesses, consumers and institutions. HP markets its products to households, small to medium size businesses and enterprises both directly, via online distribution, consumer-electronics and office-supply retailers, software partners and major technology vendors. Hewlett-Packard was one of the first companies to produce a laser printer for PCs and most software products include drivers for HP printers. The drivers control the printers through a language called PCL (printer control language). Other makers of laser printers design their printers so that they, too, understand PCL, making them able to emulate HP printers. In this way, their printers are HP-compatible and are thus automatically supported by many software products. HP is the largest worldwide seller of personal computers, surpassing rival Dell, according to market research firms Gartner and IDC reported in January 2008; the gap between HP and Dell widened substantially at the end of 2007, with HP taking a near 3.9% market share lead. HP is also the 5th largest software company in the world. No non-HP printer, however, is 100 percent HP-compatible. HP is the provider of all types of printers such as color laser printers, laser Printers, inkjet printers, multifunction printers, plotters, Mac Printers, refurbished printers, portable printers, fax machines and copiers. HP also provides printers through which you can create photos. They are basic inkjet printers, photo printers, all-in-ones printer, portable photo printers and professional-quality printers. HP also provides repair services for laser printer, printer cartridges, refurbished printers and other parts. Laser Printer Repair 911 provides corporations, small businesses and individuals with certified on site, in home and carry in printer repair services and upgraded printer parts.
Read More[...]


EPSON FX 980 User Guide

EPSON FX 980 User Guide
Getting to Bonk Your Printer Your EPSON ® FX-980 9-pin dot matrix printer provides high-quality publication and uppercase show in a case decoration. Features countenance: t a show of production paths to embellish your publication needs t the cognition to touch a citywide range of press types, including perpetual report, multi-part forms with one novel and up to six copies, labels, one sheets, envelopes, and postcards t high-speed writing of up to 569 characters per 2nd at 12 characters per advance t prepared with built-in comparable and series interface gameboard Your machine also comes with printer utility software, the EPSON Position Defender 2 programme for Microsoft ® Windows ® 95 or 98 that lets you added software. In element, some options are available to proceedings your human needs. get
Read More[...]

Linux Printer Installation

You can use a variety of tools to administer printers in CUPS. Some are special to your distribution, some are free and some are commercial. We tested CUPS mostly on a PC running SuSE Linux.We cannot say much about the use of CUPS with any other Linux distribution like RedHat or Linux Mandrake, but it should be very similar on any other system.

Two ways on how to install a printer are shown in the following:

1. a GUI based installation (using the ESP web interface)

2. an installation with command line tools

GUI based installation example

AS mentioned before, the ESP web interface is included in any CUPS version. You can use it for printer administration and job management. To show this example, we used the web interface provided by CUPS. It is accessible via Port 631, the standard port for IPP and CUPS. It is no problem if you have CUPS and other servers on the same machine while using this port.
1. Just type the following URL:
if you are working locally on your server
This procedure will lead you to the starting page of the web
interface.  Choose "Manage Printers" here to get to the printer overview.This screen shows you all printers installed on your system and their current status. Printers marked green are ready to print, printers marked red with an open tray are stopped. In that case you have to check whether there is a problem 
2. In order to install a new one, choose "Add Printer" here.
3. Then you have to give a name to your new printer.

4. In this step you have to choose the type of connection that you are using for the printer you like to install. Possible settings you can choose are:
• Disk File
• App Socket /HP Jet Direct
• Internet printing protocol
• LPR/LPD Host or printer
• Parallel or serial ports

5. Now you have to put in a valid IP-address and a remote queue name for your printer.

6. Now choose your manufacturer. All the manufacturer names offered in this list and the model
names offered in the list in Step 7 are generated by CUPS while using the PPD files stored in 

/usr/share/cups/model/[name of manufacturer]
If your printer does not appear in this list, please make sure that there is a PPD file for it in this location. If it is not, get one and just copy it to this location.

7. Now you have to choose a printer. If your printer does not appear in the list you have to install a PPD file on your system. To install a PPD you have to copy it to
and restart your CUPS server with the commands
Linux: # /etc/init.d/cups restart
Linux: # rccups restart
The last one does not work on every system, but in SuSE Linux it does. You need to be logged in as root to do that (or use the “Speruser” command SU).

Now your printer is installed and ready to be configured.

Read More[...]

Motorola Droid Pro manual user guide

This Motorola Droid Pro users manual user guide owners manual the Motorola Droid can be enjoyed with a pro. Thorough troubleshooting install installation configuration settings to factory reset and it continues where all those who use the product to read it for how to keep this documentation before using to read.

Motorola Droid Pro manual congratulations on your phone, go to the touch, and let the content key home screen calls, contacts, text items, tips and tricks digital life photos and videos music Youtube messaging social networking Web maps latitude applications for all Bluetooth wireless WiFi memory card file management tools Management Security Troubleshooting safety regulatory law is the content of the table. Download Motorola Droid Pro hereuser manual

Read More[...]

UNIX and Linux

The development of UNIX began in 1969 by the MULTICS developer Ken Thompson. He tried to create an easy-to-use operating system for mainframe computers without the typical batch operation. In the times before UNIX, most of the operating systems were batch operating systems. This means that you had to “write” the application that you want to run on a computer onto a punched card or onto a batch of punched cards. The result was usually printed out. If there was an error, you had to replace or change one or more of the punched cards and start over again. This system was lengthy and expensive so people wanted a system were more people can work in dialogue with the computer. The first step in this direction was the operating system called “MULTICS”. However, MULTICS was hard to handle and still batch operated.
The first version of UNIX was written in the programming language Assembler. Assembler is a programming language that is close to the computer platform on which it is installed. To provide 
independence of the computer platform, the UNIX was re-written in “C”. “C” is a programming language that was developed in 1971 by
Dennis Ritchie. 
In 1974, UNIX was described for the first time. At this time, it had multi-user and multi-tasking capabilities. Every user had his own “home directory” with his files; no user could access files of other users. That was elementary for a multi-user operating system. Multi- user operating systems were needed urgently because many people had to share one mainframe computer. Ken Thompson developed the UNIX system for his employer, the Bell Laboratories. Bell Laboratories is a 100% subsidiary company of AT&T. The Bell Laboratories gave the documentation for UNIX and the source code for nearly the cost price to universities. Besides,
AT&T was doomed in an Antitrust-procedure in 1956 to give away licenses on all his patents. Therefore, many different UNIX systems came into being. These systems are all UNIX-systems but differ in details.
Historically, Linux distributions have mainly been used as server operating systems, and have risen to prominence in that area; Netcraft reported in September 2006 that eight of the ten most reliable internet hosting companies ran Linux distributions on their web servers. (As of June 2008, Linux distributions represented five of ten, FreeBSD three of ten, and Microsoft two of ten. This is due to its relative stability and long uptime, and the fact that desktop software with a graphical user interface for servers is often unneeded. Enterprise and non-enterprise Linux distributions may be found running on servers. Linux distributions are the cornerstone of the LAMP server-software combination (Linux, Apache, MySQL, Perl/PHP/Python) which has achieved popularity among developers, and which is one of the more common platforms for website hosting. Linux distributions are commonly used as operating systems for supercomputers. As of August 2008, out of the top 500 systems, 423 (84.6%) run a Linux distribution. Nevertheless, the use of the different UNIX-systems was restricted by licenses and rules, made by the manufacturers. Besides, UNIX programs were given away only in binary code that is (nearly) unreadable for humans.

Read More[...]


Cara mereset Canon ip1880

download resetter for Canon ip1880
download here
Read More[...]

How Encryption Works

The encryption process involves taking each character of data and comparing it against a key. For example, you could encrypt the following string of data in any number of ways:
The quick brown fox
For sample purposes, let’s use a simple letter-number method. In this method, each letter in the alphabet corresponds to a particular number. (You may have used this method as a kid when you got a decoder wheel in your Cracker Jack or breakfast cereal box.) If you use a straight alphabetic-to-number encryption (for example, A=1, B=2, C=3, and so on), the data translates into the following:
20 8 5 17 21 9 3 11 2 18 15 23 14 6 15 24
You can then transmit this series of numbers over a network, and the receiver can decrypt the
string using the same key in reverse. From left to right, the number 20 translates to the letter T, 8 to H, 5 to E, and so on. Eventually, the receiver gets the entire message:
The quick brown fox
Most encryption methods use much more complex formulas and methods. Our sample key was about 8 bits long; some keys are extremely complex and can be a maximum of 128 bits long. The larger the key (in bits), the more complex the encryption—and the more difficult it is to crack.
Encryption Keys
To encode a message and decode an encrypted message, you need the proper encryption key or
keys. The encryption key is the table or formula that defines which character in the data trans-
lates to which encoded character. Encryption keys fall into two categories: public and private.
Let’s look at how these two types of encryption keys are used.
Private Key Encryption
Private keys are known as symmetrical keys. In private key encryption technology, both the
sender and receiver have the same key and use it to encrypt and decrypt all messages. This makes it difficult to initiate communication the first time. How do you securely transmit the single key to each user? You use public keys, which we’ll discuss shortly.
Read More[...]